Admixture To Concrete "Termit PT"

Super Water Draining/Intensifies Cure/Biocidal Admixture For Concretes And Solutions.

Description of material:
Termit PT is a superplasticizer of new generation based on polycarboxylics that intensifies the process of cure. It is used for concrete and cement mortars. Termit PT corresponds the demands of superplasticizer EN 934-2:2001, DSTU БВ.2.7-171-2008, NEQ.

Usage:

  • Custom concrete, precast concrete with easy laying from S1(Рб1,П1) to S5 (Рб5,П4);
  • In mortars produced on the plants where the demand for high early strength is put;
  • Does not include chlorides that is why can be used without any warnings for metal rods when producing pretension concrete.

Next advantages are achieved when using admixture:

  • spatial positioning of small particles of concrete and filler;
  • better dispersing and washing of concrete;
  • lowering of friction between mortar components;
  • lowered concrete usage rate for 30...35%;
  • enlargement of weather resistance, elasticity modulus, water resistance.

That lets to reach:

  • faster removal of formwork in site-cast buildings to 24 hours and faster.
  • low water-concrete proportion (w/c) because of water drainage high level, which results in high density and strength of concrete.
  • good workability and high mobility of mortar (which results in considerable lowering of costs for stacking and poly-roll of mortar)

Technical description

  • Color: Light yellow liquid
  • Containers - bins: 1, 5, 20, 1000 kg

Conditions and period of storage
Keep from freezing, pollution, exposure to direct sunlight. When transporting without original package clean containers should be used. In not damaged original package storage period is 12 months. After long storage it needs to be stirred intensively.

Technical characteristics

  • Base: Polycarboxylic ethers
  • Density: 1,08±0,02 kg/l
  • pH level: 4.0±1,0
  • Concentration of solution: 50±1%
  • Chlorides content:  ≤ 0,1 %
  • Alkali content:  ≤ 0,1 %

Recommendations for usage

  • Possible dosage: 0,2 - 0,6 % from concrete weight.
  • Recommended dosage of superplasticizer: 0.4 - 0,5 % from concrete weight.

Preparation of concrete mixture
Termit PT is recommended to be added to mortar when producing concrete on plants simultaneously with mixing water but before other admixtures. To reach necessary water draining characteristics it is recommended an optimal stirring time not less than 5 minutes.
In case of additional dosage necessity directly on the construction site it is necessary to use the same admixture which was used on the plant.
In case of additional dosage necessity in concrete mixer truck it is necessary to provide equal distribution of admixture in the mortar, for this the time of stirring should be from 1 minute for 1 m3 of concrete but not less than 5 minutes.

Notes
All technical data are given based on certified researches and they correspond the demands of EN 934-2:2001, DSTU БВ.2.7-171-2008, NEQ. Real characteristics can vary depending on the quality of fillers.

Safety measures
To get information and advice as to safe treatment, storage and utilization of chemical products users should check the latest version of chart of hazards, which contains physical, ecological, toxicological and other data connected with safety.

Legal data
Information, and in particular, recommendations which relate to the method of usage and final usage of Private Company "Termit" are given carefully based on existing experience and knowledge of  Private Company "Termit" about products on condition of proper storage of product, its treatment and usage in normal conditions according to recommendations of Private Company "Termit". In practice, there can be possible differences in quality of materials which are used for mortar preparation, that is why the usage rate of admixture needs to be defined for each situation separately. Private Company "Termit" reserves the right to change the composition of its product. All orders are received according to current actual conditions of sales and delivery. Users should always use the latest version of technical chart of material of appropriate type, copies of which should be issued at their demand.

Our products